TM 5-3810-306-34
c.
Install camshaft (2) and thrust washer (3). Align
4. REMOVE DOWELS FROM TAPPETS (6).
timing marks.
5. INSTALL PUSH RODS AND ROCKER LEVERS.
7. INSTALL FRONT COVER. (REFER TO PAGE 4-
8. INSTALL FUEL INJECTION PUMP.
(REFER TO
10. INSTALL RADIATOR. (REFER TO TM 5-3810-306-
20.)
11. INSTALL ENGINE HOOD. (REFER TO TM 5-3810-
d. Install thrust washer capscrews (4) and tighten
306-20.)
to 18 ft-lbs (24 Nm)
12. SERVICE ENGINE FLUID LEVELS.
(REFER TO
3. CHECK CAMSHAFT BACK LASH AND END PLAY.
LO 5-3810-306-12.)
13. CONNECT NEGATIVE BATTERY CABLE
AT
SHUNT. (REFER TO TM 5-3810-306-20.)
14. TEST FOR PROPER OPERATIONS. INSPECT
FOR LEAKS AND LOOSE PARTS. (REFER TO TM
5-3810-306-10.)
END OF TASK
a. End play (A) = .006 - .010 in.
(.152 -.254 mm)
b. Backlash (B) = .005 - .013 in.
(.12 - .33 mm)
4-44