TM 5-3810-306-34
INSTALLATION:
1. INSTALL EXHAUST MANIFOLD (15).
a. Assemble
exhaust
manifold
(15)
capscrews (14) and new gaskets (16).
b. Apply NEVER-SEEZ compound to the
capscrews (14). The bead on gaskets
(16) can be installed either direction.
c. Install manifold (15) and gaskets (16) to
block.
d. Torque capscrews (14) to 32 ft-lbs (43
Nm) in sequence shown. After tightening,
follow same sequence and retighten to
same value.
e. Install air inlet "T" (26) on exhaust
manifold (15) with two capscrews (23),
new lockwashers (24) and flat washers
(25).
2. INSTALL TURBOCHARGER (3).
a. Install new turbocharger gasket (13) and
apply NEVER-SEEZ compound to studs
(12).
b. Position turbocharger (3) on exhaust
manifold (15) and into hose (22). Secure
turbocharger (3) using nuts (11). Torque
nuts (11) to 24 ft-lbs (32 Nm).
c. Tighten clamps (21) on hose (22).
3. INSTALL
HOSES
AND
CLAMPS
TO
TURBOCHARGER.
a. Install exhaust connection (17) and mount
(20) on exhaust manifold (15) using
capscrews (19).
b. Connect exhaust connection (17)
to
turbocharger (3) with clamp (18).
5-11
