TM 5-3810-306-34
Section I. ALTERNATOR MAINTENANCE
ALTERNATOR ASSEMBLY
TOOLS:
Battery
Carbon pile
Analyzer, Set Engine; STE/ICE (4910-00-124-2554)
Shop Equipment Contact Maintenance Truck Mtd (4930-00-294-9518)
Shop Equipment Electrical Repair Semitrailer Mtd (4940-01-150-3113)
Shop Equipment Fuel and Electric System Engine FM Basic (4940-00-754-0714)
Test Standard Auto-Generator and Starter, Floor Mtd 500 AMP
Tool Kit Auto-Fuel and Electric System Repair (5180-00-754-0655)
SUPPLIES:
Clean rags (Item 2, Appendix B)
EQUIPMENT CONDITIONS:
Alternator removed from engine. (Refer to TM 5-3810-306-20.)
DISASSEMBLY:
1. DISASSEMBLE ALTERNATOR.
b. If necessary, remove pulley (2) fan (3) and
rotor (4) by removing nut (5) and washer
(6).
NOTE
c. Remove three nuts (7) securing stator
Scribe a locating mark on frames to
leads (8) to rectifier assembly (9).
aid positioning during assembly.
Remove stator (10).
a. Remove thru-bolts (1) and separate the
NOTE
drive end frame with rotor assembly from
the slip ring end frame with stator
Perform rectifier check and stator
assembly by prying apart with a
check
as
described
under
screwdriver at the stator slot.
INSPECTION
prior
to
further
disassembly.
6-2
