TM 5-3810-306-34
Section II. HYDRAULIC STEERING CYLINDER MAINTENANCE
STEER CYLINDER ASSEMBLY
TOOLS: General mechanic's tool kit: automotive (5180-00-177-7033)
Shop Equipment Auto-Maintenance and Repair, FM Basic (4910-00-754-0705)
Shop Equipment Auto-Maintenance and Repair, FM Suppl No. 1
Tool Outfit Hyd System, Test and Repair, 3/4 Ton Trailer Mtd
SUPPLIES:
Parts kit (Item 266, Appendix B)
Loctite # 271 (Item 23, Appendix B)
Hydraulic oil (Item 8, Appendix B)
Solvent (Item 1, Appendix B)
NEVER-SEEZ (Item 24, Appendix B)
EQUIPMENT CONDITIONS: Steer cylinder assembly removed. (Refer to TM 5-3810-306-20.)
DISASSEMBLY:
NOTE
Any
maintenance
requiring
disassembly of the cylinder should
include replacement of all cylinder
seals.
1. REMOVE CYLINDER ROD ASSEMBLY (3), SEALS
AND PISTON (7).
a. Loosen and remove setscrew (4) that attaches
lock ring (17) to rod end of barrel (2).
WARNING
Do not use air pressure to remove
cylinder rod assembly. Use only a
source of controlled hydraulic oil
pressure if rod assembly is hard to
remove.
CAUTION
Exercise extreme care when handling
or setting down cylinder rod.
10-9
