TM 9-3950-253-13&P
0007
UNLOAD AN EMPTY LIFT FRAME - Continued
WARNING
Use a ground guide at all times when unloading/loading lift frame.
Use extreme caution if high wind conditions exist while unloading lift frame. With
assistance, attach guide straps to the legs of the lift frame to stabilize the lift frame
during the unloading procedure.
Failure to follow this warning may result in injury to personnel and damage to
equipment. Seek medical attention in the event of an injury.
2.
With engine at idle speed, set MODE switch (Figure 9, Item 1) to AUTO position
(PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
Figure 9. MODE Switch at AUTO Position.
3.
With engine at idle speed, set joystick (Figure 10, Item 3) to UNLOAD position (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P).
4.
Increase engine speed (maximum 1,500 rpm) (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
5.
Hook arm (Figure 10, Item 1) rises and pivots rearward carrying lift frame (Figure 10, Item 2) with it.
NO TRANS light goes on.
Figure 10. Lift Frame Pivots Rearward.
03/15/2011Rel(1.10)root(opusualwp)wpno(O582007)
