TM 9-3950-253-13&P
0007
UNLOAD AN EMPTY LIFT FRAME - Continued
6.
When hook arm (Figure 11, Item 2) reaches its travel limit, middle frame actuators (Figure 11, Item 1) will
engage and continue unloading process. Keep joystick in UNLOAD position (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P).
Figure 11. Raise Middle Frame.
NOTE
If preparing to load container, refer to Loading and Unloading Container (WP 0008).
7.
Return engine to idle speed and release joystick (Figure 12, Item 2) when base of lift frame (Figure 12,
Item 1) is approximately 8 in. (20 cm) above ground.
Figure 12. Lift Frame 8 in. (20 cm) Above Ground.
8.
With parking brake engaged and engine at idling speed, set MODE switch (Figure 13, Item 1) to OFF
(PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
Figure 13. MODE Switch at OFF.
END OF TASK
03/15/2011Rel(1.10)root(opusualwp)wpno(O582007)