TM 9-3950-253-13&P
FIELD MAINTENANCE
NO HOOK LIFT FUNCTION - ERROR CODE C2
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic s (WP 0118, Table 2,
Vehicle parked on level ground, in neutral gear
Item 2)
with parking brake applied
(PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P)
References
TROUBLESHOOTING PROCEDURE
SYMPTOM
ERROR CODE C2
MALFUNCTION
Faulty twistlock sensor.
CORRECTIVE ACTION
1.
Check two rear twistlocks and two transport twistlocks for correct stowed position (WP 0006).
Correctly stow all twistlocks (WP 0006).
2.
Check all four twistlock sensors for damage, loose connection, or damaged wiring harness.
a.
Tighten or repair sensor mounting or connection.
b.
Replace sensor or harness if damaged.
3.
Calibrate twistlock sensors (WP 0075).
4.
Set battery disconnect switch and ignition switch to ON position (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P).
If any twistlock sensor LED does not illuminate when twistlock is correctly stowed, replace
twistlock sensor (WP 0075).
END OF WORK PACKAGE
0051-1/blank
03/15/2011Rel(1.10)root(tswp)wpno(T582050)