TM 9-3950-253-13&P
0062
PLS STOWAGE ASSEMBLY INSTALLATION - Continued
4.
Install 12 washers (Figure 16, Item 2), bolts (Figure 16, Item 1), washers (Figure 16, Item 3), and new
locknuts (Figure 16, Item 4) on right and left stowage assembly brackets (Figure 16, Item 5).
5.
Remove sling and lifting device from stowage assembly.
Figure 16. PLS Stowage Assembly Installation.
6.
Install wiring harnesses and control boxes on stowage assembly (WP 0070).
NOTE
Install hoses as noted during removal.
7.
Route pneumatic line (Figure 17, Item 5) from under stowage assembly and connect to solenoid valve
(Figure 17, Item 6).
8.
Route two hydraulic hoses (Figure 17, Item 3) from under stowage assembly and connect to manifold
(Figure 17, Item 4).
9.
Install manifold cover (Figure 17, Item 2) on stowage assembly (Figure 17, Item 7) and tighten three locking
pins (Figure 17, Item 1).
03/15/2011Rel(1.10)root(maintwp)wpno(M582061)
