TM 9-3950-253-13&P
0062
HEMTT STOWAGE ASSEMBLY INSTALLATION - Continued
3.
Install 12 washers (Figure 18, Item 2), bolts (Figure 18, Item 1), washers (Figure 18, Item 3), and new
locknuts (Figure 18, Item 4) on left and right stowage assembly brackets (Figure 18, Item 5).
4.
Remove sling and lifting device from stowage assembly.
Figure 18. HEMTT Stowage Assembly Bracket.
5.
Install control boxes on stowage assembly (WP 0070).
NOTE
Install hoses as noted during removal.
6.
Route pneumatic line (Figure 19, Item 5) from under stowage assembly and connect to solenoid valve
(Figure 19, Item 6).
7.
Route two hydraulic hoses (Figure 19, Item 3) from under stowage assembly and connect to manifold
(Figure 19, Item 4).
8.
Install manifold cover (Figure 19, Item 2) on stowage assembly (Figure 19, Item 7) and tighten three locking
pins (Figure 19, Item 1).
Figure 19. Connect Hydraulic and Pneumatic Lines.
03/15/2011Rel(1.10)root(maintwp)wpno(M582061)