TM 9-3950-253-13&P
0062
HEMTT STOWAGE ASSEMBLY INSTALLATION - Continued
NOTE
Install hoses as tagged during removal.
Place a drain pan under components as required to catch any draining hydraulic
fluid.
Perform steps 9 and 10 for HEMTT M1120 trucks.
Perform steps 11 and 12 for HEMMT M1120A4 trucks.
9.
Route four lower hydraulic lines (Figure 20, Item 4) from under stowage assembly (Figure 20, Item 3) and
connect to fittings on control box (Figure 20, Item 2).
10.
Route two hydraulic hoses (Figure 20, Item 5) from under stowage assembly (Figure 20, Item 3) and
connect to quick connect fittings (Figure 20, Item 1).
Figure 20. Hydraulic Lines.
03/15/2011Rel(1.10)root(maintwp)wpno(M582061)