TM 9-3950-253-13&P
FIELD MAINTENANCE
STOWAGE MANIFOLD AND SOLENOID VALVE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic s (WP 0118, Table 2,
Vehicle parked on level ground, in neutral gear
Item 2)
with parking brake applied (PLS: TM
9-2320-364-14&P, HEMTT: TM
9-2320-326-14&P)
Materials/Parts
Hydraulic pressure relieved (PLS: TM
Adhesive, Thread (WP 0120, Table 1, Item 1)
9-2320-364-14&P, HEMTT: TM
Cap Set, Protective, Dust and Moisture
9-2320-326-14&P)
(WP 0120, Table 1, Item 2)
Strap, Tiedown, Electrical Components
(WP 0120, Table 1, Item 17)
Tag, Marker (WP 0120, Table 1, Item 20)
References
MANIFOLD REMOVAL
WARNING
During these procedures, the operator will be required to climb on and around the
vehicle. Be sure to wear suitable footwear, ensure no surfaces are slippery, wear
suitable gloves and hard hat and maintain three points of contact to the vehicle.
Hydraulic fluid under pressure can penetrate the skin and cause injury, blindness,
or death. Pressure may build up in a hydraulic system. DO NOT perform any
hydraulic system service without first shutting down the engine to relieve system
pressure. Wear eye protection, gloves, and protective clothing while removing
hydraulic hoses. Any fluid spilled can cause a slip hazard and must be cleaned up
immediately
Failure to follow these warnings may result in death or serious injury to personnel.
Seek medical attention in the event of an injury.
0067-1
03/15/2011Rel(1.10)root(maintwp)wpno(M582066)
