TM 9-3950-253-13&P
0067
MANIFOLD REMOVAL - Continued
NOTE
Tag and note location of harnesses, hydraulic hoses, and fittings to aid in
installation.
Cap hoses and fittings to prevent contamination.
Remove and discard tiedown straps as required.
Place a drain pan under components as required to catch any draining hydraulic
fluid.
1.
Loosen three wing bolts (Figure 1, Item 1) and remove manifold cover (Figure 1, Item 2) from mounting
bracket (Figure 1, Item 6).
2.
Disconnect four hydraulic hoses (Figure 1, Item 3) from fittings (Figure 1, Item 4).
3.
Loosen screw (Figure 1, Item 7) and remove unstow harness (Figure 1, Item 8) from valve (Figure 1,
Item 5).
4.
Loosen screw (Figure 1, Item 9) and remove stow harness (Figure 1, Item 10) from valve (Figure 1, Item 5).
Figure 1. Manifold.
03/15/2011Rel(1.10)root(maintwp)wpno(M582066)