TM 9-3950-253-13&P
0068
REMOVAL
WARNING
During these procedures, personnel are required to work outside the vehicle where there
are several projecting parts, and personnel are required to bend down. Take care when
bending and straightening. A hard hat is required. Failure to follow this warning may result
in injury to personnel. Seek medical attention in the event of an injury.
NOTE
Perform steps 1 through 3 for both right and left sides.
1.
Remove clip (Figure 1, Item 7) from bolt (Figure 1, Item 2).
2.
Remove bolt (Figure 1, Item 2) and transport lock adjustable strut (Figure 1, Item 3) from bracket (Figure 1,
Item 1).
3.
Remove nut (Figure 1, Item 6), bolt (Figure 1, Item 4), and transport lock adjustable strut (Figure 1, Item 3)
from pin (Figure 1, Item 5).
Figure 1. Transport Lock Adjustable Strut.
03/15/2011Rel(1.10)root(maintwp)wpno(M582067)