TM 9-3950-253-13&P
0077
REMOVAL
Front Slider Pad Removal
WARNING
Components will fall when attaching hardware is removed. Support components while
removing attaching hardware. Failure to follow this warning may result in injury to
personnel. Seek medical attention in the event of an injury.
NOTE
Perform steps 1 and 2 for both right and left sides.
Note location of bolts on removal to aid in installation.
1.
Remove eight locknuts (Figure 1, Item 4) from bolts (Figure 1, Item 3). Discard locknuts.
2.
With assistance, remove eight bolts (Figure 1, Item 3) and front slider pad (Figure 1, Item 2) from front slider
bed (Figure 1, Item 1).
Rear Slider Pad Removal
WARNING
Components will fall when attaching hardware is removed. Support components while
removing attaching hardware. Failure to follow this warning may result in injury to
personnel. Seek medical attention in the event of an injury.
NOTE
Perform this procedure for both right and left sides.
1.
Remove six locknuts (Figure 1, Item 6) from bolts (Figure 1, Item 5). Discard locknuts.
2.
With assistance, remove six bolts (Figure 1, Item 5) and rear slider pad (Figure 1, Item 7) from rear slider
bed (Figure 1, Item 8).
0077-2
03/15/2011Rel(1.10)root(maintwp)wpno(M582076)
