TM 9-3950-253-13&P
0076
INSTALLATION - Continued
Figure 18. Light Bracket Installation.
9.
Install mounting plate (Figure 19, Item 5), and two screws (Figure 19, Item 6) on slider beam (Figure 19,
Item 1).
10.
Install gasket (Figure 19, Item 9), light (Figure 19, Item 8), two ground wires (Figure 19, Item 3), and screws
(Figure 19, Item 2) on slider beam (Figure 19, Item 1).
11.
Connect light connector (Figure 19, Item 4) to vehicle wiring harness (Figure 19, Item 7).
Figure 19. Slider Beam Light and Mounting Plate Installation.
03/15/2011Rel(1.10)root(maintwp)wpno(M582075)
