TM 9-3950-253-13&P
0076
INSTALLATION - Continued
NOTE
Perform steps 2 through 4 for both right and left sides.
2.
Feed wiring harness (Figure 17, Item 8) through slider bed (Figure 17, Item 1) and install light (Figure 17,
Item 6), two ground wires (Figure 17, Item 5), and screws (Figure 17, Item 4) on slider bed.
3.
Install light cover (Figure 17, Item 2) and two screws (Figure 17, Item 3) on light (Figure 17, Item 6).
4.
Install new tiedown straps (Figure 17, Item 7) as required.
Figure 17. Slider Bed Light Installation.
NOTE
Perform steps 5 through 8 for both right and left sides.
5.
Install light bracket (Figure 18, Item 6), bolt (Figure 18, Item 5), and new locknut (Figure 18, Item 4) on slider
assembly (Figure 18, Item 1).
6.
Install bolt (Figure 18, Item 9), ground wire (Figure 18, Item 10), and new locknut (Figure 18, Item 8) on
slider assembly (Figure 18, Item 6).
7.
Connect three light connectors (Figure 18, Item 2) to vehicle wiring harness (Figure 18, Item 3).
8.
Install new tiedown straps (Figure 18, Item 7) as required.
03/15/2011Rel(1.10)root(maintwp)wpno(M582075)
