TM 9-3950-253-13&P
0076
REMOVAL - Continued
2.
Remove eight bolts (Figure 10, Item 2) and washers (Figure 10, Item 3) from rear slider assembly
(Figure 10, Item 1).
3.
Use lifting device to remove rear slider assembly (Figure 10, Item 1) from mounting blocks (Figure 10,
Item 4) and place on flat work surface.
4.
Remove lifting device and sling from rear slider assembly (Figure 10, Item 1).
Figure 10. Rear Slider Assembly.
NOTE
For HEMTT only, remove two spacers under mounting block.
Perform step 5 for both right and left sides.
5.
Remove three bolts (Figure 11, Item 3), washers (Figure 11, Item 2), and slider mounting block (Figure 11,
Item 1) from mounting bracket (Figure 11, Item 4).
Figure 11. HEMTT Slider Mounting Block Removal.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582075)