TM 9-3950-253-13&P
0076
REMOVAL - Continued
Slider Assembly Removal
WARNING
Lifting cables, chains, hooks, and slings used for lifting must be in good condition
and of suitable capacity.
Improper use of lifting device and improper attachment of cables may cause injury
to personnel and damage to equipment. Observe all standard rules of safety.
Use extreme caution when handling heavy parts. Provide adequate support and
use assistance during procedure. Ensure any lifting device used is in good
condition and of suitable load capacity. Keep clear of heavy parts supported only
by lifting device.
Failure to follow these warnings may result in injury or death to personnel. Seek
medical attention in the event of an injury.
NOTE
Slider assembly weighs 1,400 lb (635 kg).
Note location of slider assembly on mounting blocks to aid in installation.
1.
Attach sling and lifting device to slider assembly. Loop one strap (Figure 9, Item 4) around center of beam
(Figure 9, Item 3) and two straps (Figure 9, Item 1) on right and left twistlock housings (Figure 9, Item 2).
Adjust placement of straps until slider assembly is level when raised.
Figure 9. Slider Assembly With Straps.
03/15/2011Rel(1.10)root(maintwp)wpno(M582075)