TM 9-3950-253-13&P
0076
INSTALLATION - Continued
WARNING
Lifting cables, chains, hooks, and slings used for lifting must be in good condition
and of suitable capacity.
Improper use of lifting device and improper attachment of cables may cause injury
to personnel and damage to equipment. Observe all standard rules of safety.
Use extreme caution when handling heavy parts. Provide adequate support and
use assistance during procedure. Ensure any lifting device used is in good
condition and of suitable load capacity. Keep clear of heavy parts supported only
by lifting device.
Failure to follow these warnings may result in injury or death to personnel. Seek
medical attention in the event of an injury.
NOTE
Slider assembly weighs 1,400 lb (635 kg).
Install slider assembly on mounting blocks as noted during removal.
2.
Attach sling and lifting device to slider assembly. Loop one strap (Figure 13, Item 4) around center of beam
(Figure 13, Item 3) and two straps (Figure 13, Item 1) on right and left twistlock housings (Figure 13, Item 2).
Adjust placement of straps until slider assembly is level when raised.
Figure 13. Slider Assembly With Straps.
03/15/2011Rel(1.10)root(maintwp)wpno(M582075)