TM 9-3950-253-13&P
0076
CLEANING AND INSPECTION
Clean and inspect all parts IAW (WP 0061), General Maintenance Instructions.
END OF TASK
INSTALLATION
Slider Assembly Installation
NOTE
For HEMTT only, install two spacers under mounting block.
Perform step 1 for both right and left sides.
Hand tighten bolts to allow repositioning during installation.
1.
Install slider mounting block (Figure 12, Item 1), three washers (Figure 12, Item 3), and bolts (Figure 12,
Item 2), on mounting bracket (Figure 12, Item 4).
Figure 12. HEMTT Slider Mounting Block Installation.
03/15/2011Rel(1.10)root(maintwp)wpno(M582075)