TM 9-3950-253-13&P
0091
CONVERT TO SHIPMENT CONFIGURATION - Continued
WARNING
Ensure that all personnel are off vehicle prior to lowering lift frame. Failure to follow this
warning may result in injury or death to personnel. Seek medical attention in the event of
an injury.
10.
Use lifting device to lower lift frame (Figure 6, Item 2) to middle frame (Figure 6, Item 4).
11.
Remove lifting device and sling from lifting eye at top of lift frame.
12.
Secure lift frame (Figure 6, Item 2) to tiedown eyes on truck frame (Figure 6, Item 3) with ratchet strap
(Figure 6, Item 1) provided in E-CHU kit.
Figure 6. Strap Lift Frame to Truck Bed.
WARNING
Latch support beam will fall toward the right side of the vehicle when locking pin is
removed. Support latch support beam during removal of locking pin. Failure to follow this
warning may result in injury or death to personnel. Seek medical attention in the event of
an injury.
13.
Remove clip pin (Figure 7, Item 1) from locking pin (Figure 7, Item 3).
14.
Remove locking pin (Figure 7, Item 3) from latch support bracket (Figure 7, Item 4) and lower latch support
beam to horizontal position (Figure 7, Item 2).
15.
Install locking pin (Figure 7, Item 3) in upper position on latch support bracket (Figure 7, Item 4).
16.
Install clip pin (Figure 7, Item 1) in locking pin (Figure 7, Item 3).
03/15/2011Rel(1.10)root(maintwp)wpno(M582090)