TM 9-3950-253-13&P
0091
CONVERT TO SHIPMENT CONFIGURATION - Continued
WARNING
During these procedures, the operator will be required to climb on and around the vehicle.
Be sure to wear suitable footwear, ensure no surfaces are slippery, wear suitable gloves
and hard hat, and maintain three points of contact to the vehicle. Failure to follow this
warning may result in injury to personnel. Seek medical attention in the event of an injury.
NOTE
Perform steps 6 through 9 for both right and left sides.
6.
Remove clip pin (Figure 5, Item 2) from locking pin (Figure 5, Item 4).
7.
Remove locking pin (Figure 5, Item 4) from stowage roller (Figure 5, Item 1) and rotate stowage roller to
vertical position.
8.
Install locking pin (Figure 5, Item 4) in lower position on locking plate (Figure 5, Item 3).
9.
Install clip pin (Figure 5, Item 2) in locking pin (Figure 5, Item 4).
Figure 5. Reposition Stowage Roller Locking Pins.
03/15/2011Rel(1.10)root(maintwp)wpno(M582090)
