TM 10-3930-675-24-2
CYLINDER BLOCK REPAIR - CONTINUED
0271 00
INSPECTION - CONTINUED
5.
Measure camshaft bushing bore inside diameter. Measurement must be 3.0310 to 3.0331 in. (76.987 to 77.040 mm).
INSIDE DIAMETER, CAMSHAFT BUSHING BORE
6.
Measure main bearing bore inside diameter as follows:
a.
Position main bearing caps on cylinder block.
b.
Insert master ring gage in main bearing bore no. 1 and tighten screws in same steps as installation of crankshaft
c.
Remove master ring and perform step b once for each remaining main bearing bore.
d.
Measure inside diameter in three places. Measurement must be 4.8028 to 4.8037 in. (121.990 to 122.015 mm).
INSIDE DIAMETER, MAIN BEARING BORE
0271 00-8