TM 10-3930-641-34-2
DRIVE SHAFTS DISASSEMBLY / ASSEMBLY (CONT)
(Sheet 15 of 15)
LOCATION/ITEM
ACTION
REMARKS
LOWER REAR DRIVE
SHAFT ASSEMBLY
1.
Front yoke of rear shaft and front
Align spider on yoke.
spider (40)
2.
Four capscrews (39)
Install. Tighten to a torque of 90 to 110 lb. ft.
(122 to 149 Nm).
3.
Back yoke of rear shaft and back
Align spider on yoke.
spider (40)
4.
Four capscrews (39)
Install. Tighten to a torque of 90 to 110 lb. ft.
(122 to 149 Nm).
TA099446
End
4-322
