TM 10-3930-675-20-2
0102 00-1
HYDRAULIC FILTER INDICATOR SENSORS REPLACEMENT
0102 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 31, WP 0204 00)
Crowfoot attachment set, socket wrench (Item 5, WP
0204 00)
Screwdriver set, jeweler’s (Item 30, WP 0204 00)
Materials/Parts
Grease, electrically conductive (Item 17, WP 0203 00)
Materials/Parts - Continued
Strap, tiedown (Item 27, WP 0203 00)
Tag, marker (Item 28, WP 0203 00)
Equipment Condition
Cab in transport position (TM 10-39390675-10)
Transmission access cover(s) removed (WP 0135 00)
Hydraulic system pressure relieved (WP 0164 00)
Master battery switch in OFF position
WARNING
•
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pressure
has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid under
pressure can penetrate the skin, causing serious injury.
•
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an acci-
dent occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed
within a few hours or gangrene may result.
•
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing switches.
•
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may
result in injury to personnel.
