TM 10-3930-675-20-2
0117 00-6
TRANSMISSION AND FRONT AND REAR AXLE VENT HOSES
REPLACEMENT - CONTINUED
0117 00
TRANSMISSION VENT HOSE REMOVAL - CONTINUED
3.
Remove locknut (18), two washers (19), screw (20), and clamp (22) holding transmission vent (21) to bracket (26). Dis-
card locknut.
4.
Remove clamp (22) from transmission vent (21).
5.
Remove transmission vent (21) from vent hose (23).
6.
At top of transmission (25), disconnect other end of vent hose (23) from adapter (24).
7.
Remove adapter (24) from transmission (25).
8.
Remove tiedown strap and remove transmission vent hose (23) from vehicle. Discard tiedown strap.
TRANSMISSION VENT HOSE INSTALLATION
1.
Position transmission vent hose (23) to vehicle.
2.
Apply sealing compound to threads of adapter (24) and install adapter to top of transmission (25).
3.
Connect end of vent hose (23) to adapter (24).
4.
At other end of vent hose (23), install transmission vent (21).
5.
Install clamp (22) around transmission vent (21).
6.
Install clamp (22) to bracket (26) with screw (20), two washers (19), and new locknut (18).
26
18,19,20
21
22
23
24
25
