TM 10-3930-675-20-20118 00-4FRONT AND REAR PROPELLER SHAFTS REPLACEMENT - CONTINUED0118 00REAR PROPELLER SHAFT REMOVAL - CONTINUEDNOTEPerform following steps at rear of rear propeller shaft.3.Remove 12 locknuts (14) and lockwashers (15) from flange of propeller shaft (13). Discard locknuts and lockwashers.4.Remove propeller shaft (13) from studs of parking brake disc (16) of rear axle (17) and remove from vehicle.REAR PROPELLER SHAFT INSTALLATIONNOTE•Perform following steps at rear of rear propeller shaft.•Ensure that witness marks are alined.1.Position propeller shaft (13) to studs of parking brake disc (16) of rear axle (17).2.Install 12 new lockwashers (15) and new locknuts (14). Tighten locknuts to 85 lb-ft (115 Nm).NOTEPerform following steps at front of rear propeller shaft.3.Position propeller shaft (13) to flange of transmission (9).4.Install 12 screws (10), new lockwashers (11), and new locknuts (12). Tighten locknuts to 85 lb-ft (115 Nm).1314,151617
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
