TM 10-3930-675-20-2
0195 00-1
TRANSMISSION CALIBRATION
0195 00
THIS WORK PACKAGE COVERS
Calibration
INITIAL SETUP
References
TM 10-3930-675-10
CALIBRATION
NOTE
Calibration procedures and checks must be performed if any of the following maintenance actions have
occurred:
•
Transmission ECM replaced or disconnected
•
Transmission oil replaced
•
Repairs or adjustment to transmission
•
Transmission assembly replaced
1.
Access to Calibration Menus.
a.
Turn master battery switch to ON position.
b.
Turn ignition ON.
c.
Place transmission shift control lever in Neutral (N) position.
d.
Apply parking brake.
e.
Start engine and operate at idle speed.
f.
Wait for transmission oil temperature to reach operating range (55° C to 90° C).
g.
Select Kalmar service menu on driver’s Electronic Control System (ESC) display screen and press “Enter”.
h.
Enter calibration program access number “13221” and press “Enter”.
i.
Press right arrow button to locate “CALIBR GEAR BOX” menu, then press “Enter”.
