TM 10-3930-675-20-2
0060 00-4
ETHER COLD START SYSTEM MAINTENANCE - CONTINUED
0060 00
COLD START ACTIVATION SOLENOID REMOVAL
NOTE
Remove and discard tiedown straps.
1.
Remove canister (refer to Ether Canister Removal).
2.
Disconnect connector (12) of solenoid harness from wiring harness connector (11).
3.
Disconnect ether supply tube (9) from elbow on underside of solenoid (4).
4.
Remove two screws (7), washers (8), and solenoid (4) from mounting bracket (10).
5.
Remove elbow from bottom of solenoid (4).
11
12