TM 10-3930-675-24-2
FUEL PUMP ASSEMBLY REPLACEMENT - CONTINUED
0216 00
INSTALLATION
NOTE
Ensure both fuel pump and accessory drive mating flanges are clean and free of old gasket material.
1.
Install jaw coupling spider (7), new gasket (1), and fuel pump (5) on accessory drive (8).
2.
Secure in place with four screws (3), nuts (6), and eight washers (4). Tighten screws to 35 lb-ft (47 Nm).
3.
Connect fuel hose from fuel tank to pump. Connect fuel line from fuel pump to cylinder head (WP 0060 00).
4.
Connect wire lead to fuel solenoid shutoff valve (WP 0056 00).
NOTE
To reduce engine cranking time, fill fuel filter with fuel prior to installation.
5.
Install fuel filter/water separator (WP 0059 00).
6.
On USMC and RESET vehicles, open ball valve.
BALL
VALVE
OPEN
434-40003
7.
Connect battery cables (WP 0110 00).
8.
Operate engine (TM 10-3930-675-10) and check for fuel leaks.
9.
Install engine cover (WP 0148 00).
END OF WORK PACKAGE
0216 00-3/(0216 00-4 Blank)
