TM 10-3930-675-24-2
TOPHANDLER WIRING HARNESSES REPLACEMENT - CONTINUED
0221 00
WIRING HARNESS A, TOPHANDLER JUNCTION BOX-TO-JUNCTION BOX 182: REMOVAL
1.
Disconnect wiring harness A (2) connector from tophandler junction box (1) connector.
1
2
2.
Trace routing of wiring harness A (2). Loosen cable clamps (3) and cut tiedown straps as needed to gain free movement
of harness A.
3.
Unwrap upper and lower cable guard (7) from harness A (2) routing. Retain for installation.
4.
Loosen four screws (5) and remove cover (4) from junction box 182 (6). Inspect rubber seal in groove of cover. Replace
only if damaged.
3
2
4
5
6
7
0221 00-2
