TM 10-3930-675-24-2
BOGIE WHEEL ASSEMBLY MAINTENANCE - CONTINUED
0233 00
HYDRAULIC CYLINDERS REMOVAL - CONTINUED
NOTE
If bogie wheel frame is to be removed from vehicle after hydraulic cylinders are removed, support
bogie wheel frame with nylon sling and overhead lifting device instead of wood blocks.
2.
Support frame (1) with wood blocks.
3.
Disconnect hydraulic hoses from each of two hydraulic cylinders (9).
8
1
7
9
2
2
10
13
10
12
11
11
NOTE
Perform steps 4 thru 6 at top end of each hydraulic cylinder.
4.
Remove screw (20) and washer (19) from end of upper pin (14).
5.
Remove upper pin (14), two washers (16), and O-rings (17) from vehicle frame (15). Retain O-rings if not damaged.
6.
Remove grease fitting (18) from upper pin (14).
16
17
14
15
18
19
20
0233 00-4
