TM 10-3930-675-24-2
BOGIE WHEEL ASSEMBLY MAINTENANCE - CONTINUED
0233 00
SCREW ASSEMBLY REMOVAL
1.
Lower bogie wheels (TM 10-3930-675-10).
2.
Remove two locknuts (26) and ring (25) from lower end of screw (21).
3.
Lift screw (21) assembly out of frame (1).
4.
Remove swivel lock (23) assembly from screw (21).
5.
Remove retaining ring (24) from swivel lock (23) and press out nut (22).
21
22
23
1
24
25
26
SCREW ASSEMBLY INSTALLATION
1.
Press nut (22) into swivel lock (23) and install retaining ring (24).
2.
Install swivel lock (23) assembly on screw (21).
3.
Position screw (21) assembly on frame (1).
NOTE
After installation of ring and two locknuts, screw must be able to rotate freely in frame. Adjust posi-
tion of two locknuts as necessary.
4.
Install ring (25) and two locknuts (26) on lower end of screw (21). Tighten one locknut against the other.
5.
6.
Raise bogie wheels (TM 10-3930-675-10).
0233 00-6