TM 10-3930-675-24-2
IDLER GEARS AND CAMSHAFT DRIVE GEAR REPLACEMENT - CONTINUED
0276 00
INSTALLATION - CONTINUED
4.
Install camshaft drive gear as follows:
a.
Install camshaft thrust plate (27) and secure with two screws (28). Tighten screws to 35 lb-ft (47 Nm).
27
28
NOTE
Ensure direction of arrow on camshaft key is the same as noted during removal.
b.
Install camshaft key (29) in slot on camshaft. Seat key by tapping with a plastic-faced hammer.
29
CAMSHAFT
c.
Apply a coating of lubriplate to nose of camshaft.
0276 00-13