TM 10-3930-675-24-2
OIL PUMP ASSEMBLY MAINTENANCE - CONTINUED
0277 00
INSPECTION - CONTINUED
6.
Measure inside diameter of drive gear bore. Gear bore ID must be 0.7323 to 07.333 in. (18.600 to 18.625 mm). If worn
past limits, replace gear.
INSIDE DIAMETER, DRIVE GEAR BORE
DISASSEMBLY
1.
Use oil pump gear puller to remove main drive gear (14).
14
NOTE
Rear cover plate is located with dowel pins. Take care not to damage or break dowels.
2.
Remove four screws (15) and remove rear cover plate (13).
15
15
13
0277 00-5