TM 5-3810-306-34
OUTRIGGER JACK CYLINDER ASSEMBLY
TOOLS: General mechanic's tool kit: automotive (5180-00-177-7033)
Shop Equipment Auto-Maintenance and Repair, FM Basic (4910-00-754-0705)
Shop Equipment Auto-Maintenance and Repair, FM Suppl No. 1
Tool Outfit Hyd System, Test and Repair, 3/4 Ton Trailer Mtd
SUPPLIES:
Parts kit, seal repl (Item 57, Appendix B)
Parts kit, check valve (Item 36, Appendix B)
Solvent (Item 1, Appendix B)
Loctite #271 (Item 23, Appendix B)
Hydraulic oil (Item 8, Appendix B)
NEVER-SEEZ (Item 24, Appendix B)
EQUIPMENT CONDITION: Outrigger jack cylinder assembly removed.
(Refer to page 11-15.)
DISASSEMBLY:
NOTE
Any
maintenance
requiring
disassembly of cylinder should
include replacement of all cylinder
seals.
1. REMOVE THE CHECK VALVE (19) FROM PORT
BLOCK.
2. DRAIN ALL OIL FROM HYDRAULIC CYLINDER.
3. REMOVE CYLINDER ROD ASSEMBLY.
a. Remove ring (14) from outside of hood (13).
b. Remove setscrew (3) securing head (13) to
barrel (2).
WARNING
Do not use air pressure to remove
cylinder rod assembly. Use only a
source of controlled hydraulic oil
pressure if rod assembly is hard to
remove.
11-17
