TM 9-3950-253-13&P
FIELD MAINTENANCE
STOWAGE ASSEMBLY REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic s (WP 0118, Table 2,
Item 2)
Sling, Nylon (WP 0118, Table 2, Item 1)
Tool Set, SATS Base (WP 0118, Table 2, Item 3)
Equipment Condition
Lifting Device
Vehicle parked on level ground, in neutral gear
with parking brake applied
Materials/Parts
(PLS: TM 9-2320-364-14&P,
Cap Set, Protective, Dust and Moisture
HEMTT: TM 9-2320-326-14&P)
(WP 0120, Table 1, Item 2)
Toolbox removed - HEMTT only
Grease, Automotive and Artillery, GAA (WP 0120,
(TM 9-2320-326-14&P)
Table 1, Item 9)
Lift frame placed on level ground (WP 0007)
Strap, Tiedown, Electrical Components
Hook arm fully extended
(WP 0120, Table 1, Item 17)
(PLS: TM 9-2320-364-14&P,
Tag, Marker (WP 0120, Table 1, Item 20)
HEMTT: TM 9-2320-326-14&P)
Locknut Qty: 12 (WP 0121, Table 1, Item 15)
Air system pressure relieved
Locknut Qty: 4 (WP 0121, Table 1, Item 2)
(PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P)
Personnel Required
(Two)
HEMTT STOWAGE ASSEMBLY REMOVAL
WARNING
Disconnecting quick disconnect fittings will not relieve hydraulic system pressure.
Use extreme caution when disconnecting hydraulic hoses. Contact with hydraulic
oil can damage eyes and skin. Wear eye protection, gloves, and protective clothing
while removing hydraulic hoses.
Hydraulic fluid under pressure can penetrate the skin and cause injury, blindness,
or death. Pressure may build up in a hydraulic system. DO NOT perform any
hydraulic system service without first shutting down the engine to relieve system
pressure.
Any fluid spilled can cause a slip hazard and must be cleaned up immediately.
Failure to follow these warnings may result in death or serious injury to personnel.
Seek medical attention in the event of an injury.
0062-1
03/15/2011Rel(1.10)root(maintwp)wpno(M582061)
