TM 9-3950-253-13&P
0062
HEMTT STOWAGE ASSEMBLY REMOVAL - Continued
5.
Loosen three locking pins (Figure 3, Item 1), and remove manifold cover (Figure 3, Item 2) from stowage
assembly (Figure 3, Item 7).
NOTE
Place a drain pan under components as required to catch any draining hydraulic fluid.
6.
Disconnect two hydraulic hoses (Figure 3, Item 3) from manifold (Figure 3, Item 4) and route to under
stowage assembly (Figure 3, Item 7).
7.
Disconnect pneumatic line (Figure 3, Item 5) from solenoid valve (Figure 3, Item 6) and route to under
stowage assembly (Figure 3, Item 7).
Figure 3. Disconnect Hydraulic and Pneumatic Lines.
8.
Remove control boxes and wiring harnesses from stowage assembly (WP 0070).
03/15/2011Rel(1.10)root(maintwp)wpno(M582061)