TM 9-3950-253-13&P
0062
HEMTT STOWAGE ASSEMBLY REMOVAL - Continued
NOTE
Tag and note position of all hoses and fittings to aid in installation.
Cap all hoses and fittings on removal to prevent contamination.
Remove and discard tiedown straps as required.
Place a drain pan under components as required to catch any draining hydraulic
fluid.
Perform steps 1 and 2 for HEMTT M1120 trucks.
Perform steps 3 and 4 for HEMTT M1120A4 trucks.
1.
Disconnect two hydraulic hoses (Figure 1, Item 5) from quick connect fittings (Figure 1, Item 1) and route to
under stowage assembly (Figure 1, Item 3).
2.
Slowly disconnect four lower hydraulic hoses (Figure 1, Item 4) from fittings on control box (Figure 1, Item 2)
and route to under stowage assembly (Figure 1, Item 3).
Figure 1. Remove Hydraulic Lines - HEMTT, M1120.
03/15/2011Rel(1.10)root(maintwp)wpno(M582061)
