TM 9-3950-253-13&P
0070
ADDITIONAL MUX BOX WIRING REMOVAL
1.
Disconnect brown wire from position 1 (Figure 14, Item 13), red wire from position 2 (Figure 14, Item 14),
orange wire from position 3 (Figure 14, Item 15), and yellow wire from position 4 (Figure 14, Item 16), on P1.
2.
Remove CAN bus harness (Figure 14, Item 11) from Additional MUX box (Figure 14, Item 1).
3.
Disconnect brown wire from position 1 (Figure 14, Item 17), red wire from position 2 (Figure 14, Item 18),
orange wire from position 3 (Figure 14, Item 19), and yellow wire from position 4 (Figure 14, Item 20), on P2.
4.
Remove CAN bus harness (Figure 14, Item 12) from Additional MUX box (Figure 14, Item 1).
5.
Disconnect 1465 wire from position 3 (Figure 14, Item 2) on P3, 1467 wire from position 3 (Figure 14,
Item 3) on P4, 1468 wire from position 3 (Figure 14, Item 4) on P5, and 1464 wire from position 3
(Figure 14, Item 5) on P6.
6.
Disconnect 1463 wire from position 3 (Figure 14, Item 6) on P7, 1462 wire from position 3 (Figure 14,
Item 7) on P8, 1469 wire from position 3 (Figure 14, Item 8) on P9, and 1466 wire from position 3
(Figure 14, Item 9) on P10.
7.
Remove stowage loom harness (Figure 14, Item 10) from Additional MUX box (Figure 14, Item 1).
Figure 14. Additional MUX Box Wiring Removal.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect all parts IAW (WP 0061), General Maintenance Instructions.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582069)