TM 9-3950-253-13&P
FIELD MAINTENANCE
LIFT FRAME ROLLER AND ROLLER PIN REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic s (WP 0118, Table 2,
Item 2)
Equipment Condition
Materials/Parts
Lift frame placed on level ground and supported
Rag, Wiping (WP 0120, Table 1, Item 16)
by hook arm or alternate lifting device
Locknut Qty: 2 (WP 0121, Table 1, Item 9)
REMOVAL
NOTE
Perform steps 1 through 7 for both right and left sides.
1.
Remove three grease fittings (Figure 1, Item 3) from roller pin (Figure 1, Item 2).
2.
Remove nut (Figure 1, Item 5), washer (Figure 1, Item 4), and roller (Figure 1, Item 1) from roller pin
(Figure 1, Item 2).
Figure 1. Roller and Grease Fittings.
03/15/2011Rel(1.10)root(maintwp)wpno(M582072)
