TM 9-3950-253-13&P
0080
REMOVAL - Continued
7.
Remove two bolts (Figure 3, Item 5), washers (Figure 3, Item 4), end plate (Figure 3, Item 3), and shim
(Figure 3, Item 2) from rear frame (Figure 3, Item 1).
8.
Use lifting device to remove rear slider bed (Figure 3, Item 8) from rear frame (Figure 3, Item 1) and place
on flat surface.
9.
Remove two bearings (Figure 3, Item 7) and shim (Figure 3, Item 6) from rear frame (Figure 3, Item 1).
Figure 3. Rear Slider Bed Removal.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect all parts IAW (WP 0061), General Maintenance Instructions.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582079)