TM 9-3950-253-13&P
0080
REMOVAL
NOTE
Perform steps 1 through 9 for both right and left sides.
1.
Remove and discard tiedown straps (Figure 1, Item 7) as required.
2.
Remove two screws (Figure 1, Item 3) and light cover (Figure 1, Item 2) from slider bed (Figure 1, Item 1).
3.
Remove two screws (Figure 1, Item 4), ground wires (Figure 1, Item 5), light (Figure 1, Item 6), and light
wiring harness (Figure 1, Item 8) from slider bed (Figure 1, Item 1).
Figure 1. Slider Bed Light Removal.
03/15/2011Rel(1.10)root(maintwp)wpno(M582079)