TM 9-3950-253-13&P
0080
REMOVAL - Continued
4.
Remove two screws (Figure 2, Item 3) and reflector (Figure 2, Item 2) from slider assembly (Figure 2,
Item 1).
Figure 2. Reflector Removal.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Do not
allow fingers to come between rear slider bed and roller assembly during removal. Failure
to follow this warning may result in injury or death to personnel. Seek medical attention in
the event of an injury.
NOTE
Rear slider bed weighs 190 lb (86 kg).
5.
Attach sling and lifting device to rear slider bed (Figure 3, Item 8).
6.
Use lifting device to remove slack from sling.
03/15/2011Rel(1.10)root(maintwp)wpno(M582079)