TM 9-3950-253-13&P
0079
INSTALLATION - Continued
WARNING
Use caution and wear eye protection when installing clamping device. Clamping device is
spring loaded and may move erratically during installation. Failure to follow this warning
may result in injury to personnel or damage to equipment. Seek medical attention in the
event of an injury.
5.
With assistance, and while supporting clamping device handle (Figure 4, Item 2), apply pressure to plate
(Figure 4, Item 3) to position holes as marked during removal, and place punch in one hole to prevent shaft
movement.
6.
Install three washers (Figure 4, Item 5) and bolts (Figure 4, Item 6) in shaft (Figure 4, Item 4).
7.
Install new tiedown straps (Figure 4, Item 1) as required.
Figure 4. Clamping Device Installation.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582078)