TM 9-3950-253-13&P
0079
INSTALLATION
NOTE
Install same number of spacers as removed.
Install spring as noted during removal.
1.
With assistance, install clamping device (Figure 3, Item 2), plate (Figure 3, Item 4), spring (Figure 3, Item 6),
and shaft (Figure 3, Item 3) in slider housing (Figure 3, Item 1).
2.
Install new spring pin (Figure 3, Item 5) in plate (Figure 3, Item 4).
3.
Install two spring pins (Figure 3, Item 8) in block (Figure 3, Item 10).
4.
Install spacers (Figure 3, Item 9), block (Figure 3, Item 10), and bolt (Figure 3, Item 7) in clamping device
(Figure 3, Item 2).
Figure 3. Clamping Device Installation.
03/15/2011Rel(1.10)root(maintwp)wpno(M582078)