TM 9-3950-253-13&P
0079
REMOVAL - Continued
Figure 1. Clamping Device Bolt Removal.
NOTE
Note number of spacers removed to aid in installation.
Note position of spring to aid in installation.
5.
Remove bolt (Figure 2, Item 7), block (Figure 2, Item 10), and spacers (Figure 2, Item 9) from clamping
device (Figure 2, Item 2).
6.
Remove two spring pins (Figure 2, Item 8) from block (Figure 2, Item 10).
7.
Remove spring pin (Figure 2, Item 5) from plate (Figure 2, Item 4). Discard spring pin.
8.
With assistance, while supporting clamping device (Figure 2, Item 2), remove shaft (Figure 2, Item 3), spring
(Figure 2, Item 6), plate (Figure 2, Item 4), and clamping device (Figure 2, Item 2) from slider housing
(Figure 2, Item 1).
03/15/2011Rel(1.10)root(maintwp)wpno(M582078)