TM 9-3950-253-13&P
0078
FOLLOW-ON MAINTENANCE - Continued
Table 1. Slider Tolerances.
IF DIMENSION A-B IS
THEN C-D MUST BE
94.7 in. +/- 0.08 (2,425 mm +/- 2 mm)
95.79 in. +/- 0.08 (2,433 mm +/- 2 mm)
95.5 in. +/- 0.08 (2,426 mm +/- 2 mm)
95.75 in. +/- 0.08 (2,432 mm +/- 2 mm)
95.55 in. +/- 0.08 (2,427 mm +/- 2 mm)
95.7 in. +/- 0.08 (2,431 mm +/- 2 mm)
95.6 in. +/- 0.08 (2,428 mm +/- 2 mm)
95.67 in. +/- 0.08 (2,430 mm +/- 2 mm)
95.67 in. +/- 0.08 (2,430 mm +/- 2 mm)
95.6 in. +/- 0.08 (2,428 mm +/- 2 mm)
95.7 in. +/- 0.08 (2,431 mm +/- 2 mm)
95.55 in. +/- 0.08 (2,427 mm +/- 2 mm)
95.75 in. +/- 0.08 (2,432 mm +/- 2 mm)
95.5 in. +/- 0.08 (2,426 mm +/- 2 mm)
95.79 in. +/- 0.08 (2,433 mm +/- 2 mm)
95.3 in. +/- 0.08 (2,424 mm +/- 2 mm)
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.10)root(maintwp)wpno(M582077)