TM 9-3950-253-13&P
0088
REMOVAL
NOTE
Perform steps 1 through 3 for both right and left sides.
1.
Remove locknut (Figure 1, Item 3), bolt (Figure 1, Item 10), washer (Figure 1, Item 11), and chain (Figure 1,
Item 8) from stand (Figure 1, Item 1). Discard locknut.
WARNING
Component will fall when attaching hardware is removed. Support component while
removing attaching hardware. Failure to follow this warning may result in injury to
personnel. Seek medical attention in the event of an injury.
2.
Remove locking pin (Figure 1, Item 9) with attached chain (Figure 1, Item 8) from lift frame (Figure 1,
Item 2).
3.
Remove locknut (Figure 1, Item 4), washer (Figure 1, Item 5), bolt (Figure 1, Item 7), washer (Figure 1,
Item 6), and stand (Figure 1, Item 1) from lift frame (Figure 1, Item 2). Discard locknut.
Figure 1. Stand.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect all parts IAW (WP 0061), General Maintenance Instructions.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582087)