TM 9-3950-253-13&P
0087
1.
Remove snap ring pin (Figure 1, Item 2), retaining pin (Figure 1, Item 3), and stowage cylinder (Figure 1,
Item 4) from stowage guide (Figure 1, Item 1).
Figure 1. Disconnect Stowage Cylinder From Stowage Guide.
2.
Remove three bolts (Figure 2, Item 5), washers (Figure 2, Item 6), washers (Figure 2, Item 3), locknuts
(Figure 2, Item 4), and sensor cover (Figure 2, Item 1) from stowage assembly (Figure 2, Item 2). Discard
locknuts.
Figure 2. Sensor Cover Removal.
03/15/2011Rel(1.10)root(maintwp)wpno(M582086)